Husqvarna 16 Inch 435e II is the second generation gas chainsaw released by world-famous Husqvarna. The lightweight all-round chainsaw is very easy to start and is featured with easy handling facilities. The less it weighs, the more it is powerful. The part-time users and the professionals will find new pleasure in using a powerful, handy chainsaw with the use of it.
Almost all the facilities are built-in here for the best-desired output of the users. The powerful and strong chain rotation, lower fuel consumption, less vibration, low emission, less noise are the user-friendly features of the chainsaw to take it to the leading raw of the chainsaw industry.
In our today’s effort on Husqvarna 435 Chainsaw Review, we shall try to bring out all the ins and outs of the saw in detail to meet your query.
Why we prefer Husqvarna 435 Gas Chainsaw?
» It is lightweight.
» It is very easy to start.
» It is very powerful.
» It runs its chain at high speed.
» It consumes less fuel.
» It emits less.
» It oils chain automatically.
» It ensures more safety.
Key features of Husqvarna 435 Gas Chainsaw
The chainsaw is designed with almost all the best features to make it the all-rounder chainsaw. If you are looking for comfort in your wood cutting job, there is no better alternative than Husqvarna 435 Gas Chainsaw. Any woodworks whatever light or heavy can be done with its smooth operation.
All the features mainly focus on making the operation easier for users. The new users or part-time users will love its friendly facilities and strength to perform their cutting actions. Among all its fruitful features, few are furnished below for a better understanding about the all-rounder.
X-Torq®engine runs the chain of Husqvarna 435e II chainsaw. As we know, X-Torq® maintains the world´s most stringent environmental regulations by delivering lower fuel consumption and reduces exhaust emission. The 50 cc engine delivers 2.2 hp power runs at 9000 rpm speed which is enough to perform any light to hard cutting easy. The torque is also very strong and for tough operation.
The centrifugal air cleaning innovative technology removes dust and large particles to reach the engine during operation. The feature thus minimizes the engine’s maintenance cost and gives the engine a long life.
Easy to Start
Starting 435 chainsaw is not likely hard for any other gas chainsaws available in the market. Combination of In-built start/stop switch, Smart Start® and fuel pump make the easy start technology different from others. Simple and firm pulling off the throttle allows easy start in less effort.
Inertia activated chain brake
The feature ensures maximum safety from accidental kickback. The instant auto-activation of the chain brake activated when kickback happens.
Quick Release Air Filter
The air filter of Husqvarna 435 Chainsaw is very easy to open and to clean in a few seconds. This feature helps to minimize the effort to clean the filter during operation.
Husqvarna 435 Chainsaw is designed specially to reduce the vibration of the engine. The vibration of the engine reaches to the handles at very low level and doesn’t exhaust the user during long time operation.
Snap-lock cylinder cover
The cylinder cover of the chainsaw is locked by the system and easy to unlock to change the plug and to clean the engine very easily.
Visible fuel level
Transparent fuel level helps the operator to know the fuel store in the tank.
The system removes air from the carburetor and allows the engine to start in minimum effort.
Auto Chain Oiler
The auto chain oiler provides proper lubrication of the chain during operation. The feature helps to keep smooth running the chain around the bar.
Flip-up tank cap
The flip-up tank cap is very easy to open as well as close the fuel tank and allow fueling faster.
Tool-less Chain Tension
The tool-less chain tensioning system allows faster chain tension in a simple way. The hard job becomes easy with the side mounting knob.
Product Specification of Husqvarna 435 Chainsaw
|Cylinder displacement||40.9 см³|
|Cylinder size||2.5 cu.inch|
|Power output||2.2 hp|
|Maximum power speed||9000 rpm|
|Fuel tank volume||0.78 US pint|
|Fuel consumption||652 g/kWh|
|Idling speed||2900 rpm|
|Electrode gap||0.02 in|
|Recommended bar length, max||18 in|
|Recommended bar length, min||13 in|
|Weight (excl. cutting equipment)||9.7 lbs|
|Sound power level (LWA)||114 dB(A)|
|Sound power level, measured||112 dB(A)|
|Sound pressure level at operators ear||102 dB(A)|
Inside the Package
Husqvarna 16 Inch 435e II Gas Chainsaw tool, 16 inches chain, 16 inches bar, bar folder, tensioning wrench, warranty book, user manual
How to Operate start Husqvarna 435 Chainsaw
The main attraction of the Husqvarna 435 chainsaw is its easy starting facility. The strength of the powerful engine in the small body makes the saw a favourite one for the part-timer and landowners. The simple operating procedure of the chainsaw is furnished below:
Let start the operation by fueling the chainsaw. Mixture ration of gasoline and oil is 50:1. Maintain the mixture ration properly for less emission and proper engine running.
» Clean the surrounding area of the oil cap.
» Open the cap of the fuel tank.
» Fill the tank by half with gasoline.
» Fill oil as a ratio. Close the tank with the cap tightly.
» Shake the tank to mix the oil and gasoline properly.
» Fill the rest half of the tank with gasoline and mix proper oil
» Shake the tank again to ensure a proper mixture of oil and gasoline.
» Never mix used oil with the fuel.
» Before shaking the tank, close the tank cap tightly.
» Do not mix fuel for more than one month.
» Keep the fuel tank safe away from the engine before it starts.
Make the chainsaw ready to start
Before starting the engine, check the following properly:
» Check all the nuts and bolts tighten properly.
» Check all the parts are well and working properly.
» Check the chain fits with the bar accordingly.
» Check the chain is tighten properly.
» Check the chain brake done with the front handle.
» Clean any liquid or oil on the chainsaw.
Once the checking is done, follow the below procedures:
» Pull the choke control out to set it.
» Push the air purge bulb 6 times or more until the oil fills the bulb.
» Push the start/stop button to start position.
» Put the chainsaw on the flat surface.
» Position the lest foot on the rare handle to hold it.
» Pull the start throttle slowly until it resists.
» Now pull the throttle up in firm speed to start the engine.
» Do the same pulling until the engine starts.
» Once the engine starts, disengage the throttle to the lockout.
» Let reach its speed to its top.
» Push the front handguard to run the chain.
1. Can I use different size bar?
Ans: Yes, you can use different size bar. The recommended bar is 16 inches but 18 and 20 inches bar can be used. You should have sound knowledge to use those.
2. Why should I use Husqvarna 435 chainsaw?
Ans: there are many reasons to use the chainsaw though it is not the best one in the market for heavy-duty performance. But many versatile uses of the chainsaw can be your best friend. The small powerhouse can give the maximum in its world and featured with maximum safety. The smart use of the saw will give you much comfort and dimension to make your hard jobs easier.
3. What kinds of jobs can be done with the chainsaw?
Ans: Almost all kinds woodcutting jobs can be done in its chain range. Tree cutting, wood cutting, lambing within the bar size can be done smoothly.
4. Does 435 has kickback safety?
Ans: Yes, the chainsaw reduces accidental kickback. To get better performance use an anti-kickback chain in the bar.
5. What are the safety features of the chainsaw?
Ans: Husquvarna 435 chainsaw is very popular to the part-timer and landowners. Keeping the operators level, the chainsaw has many safety features. Following are they:
» Front handguard
» Rare handle guard
» Chain catcher
» Anti-kickback safety
» Less vibration
In our Husqvarna 435 Chainsaw Review, we tried to flash all the ins and outs of the saw to the seekers in details. Following all the features and relevant specifications, we can proudly say that the Husqvarna 435 gas powered chainsaw will be the best support to the novice and part-timers to make the cutting wood comfortable. The perfect use of the chainsaw will make all the tough jobs to an easy one. Hold the handle of the saw and enjoy your cutting.
We strongly recommend not to use a chainsaw to cut trees for pleasure. Green is now reducing because of the urban extension. Whatever green we have in our range are most valuable to us. So, cut only much need trees. Save the green and live green.
Again, none of our comments, thoughts intend deforestation. We always recommend using the chainsaw in your perfect need. Save the green of the earth.